Default Tolerance Codes

Up

Back

 
System Option:

Overview

Enhanced

Tolerance

Probes/Sensors

File Locations

Report States

SPC Format

Feature Char.

CMM Char.

Report Config.

Colors

Form Control

Graphic Ctrls

 
 
 

Site Map

 

helmel.com

System Options

The Tolerance Code page defines the behavior of Process Control Tolerance in Geomet.

Default Tolerance Code Controls

To understand the limits assigned to each zone, please read the Process Control Tolerance help section. The values entered for each zone is the upper limit of control. For example: Zone A will have a range of 0% - 70%, Zone B will have a range of 70% - 80%. Zone D is implied as the Upper limit of Zone C (90%) - Tolerance Limit.

Default: Zone A 70%, Zone B 80%, Zone C 90%

Use Defaults when Opening

When assigning the tolerance to a feature and opening the PCT Dialog. Geomet will automatically assign the individual zone values based on the defaults set in Tolerance Codes defaults. Normally the opening of the PCT Dialog will leave the limits blank.

Default: Off

Applying your Selections

When finished making all your selections, press the <Apply> button and close the System Options by pressing the <Ok> button.


return to System Options