There are several key presses which compliment the
standard Windows interface to scroll and reposition through the
displayed inspection report. In Windows, a list, or report that exceeds
the boundaries of the display will provide scroll bars normally located
on the right and bottom of the view. Using these scroll bars requires
the use of the mouse which controls the positioning by sliding the
"Scroll Box". For further assistance on using scroll bars, please review
Help in Windows.
Geomet provides shortcut key presses to control
the positioning of the inspection report in the available area on the
display.
Geomet
Inspection Report Positioning Keys |
Down Arrow
Up Arrow
Left Arrow
Right Arrow
Home
Ctrl + Home
End
Ctrl + End
Ctrl + g |
Moves the inspection report
down one line.
Moves the Inspection report up
one line.
Moves the Inspection report to
the left one character.
Moves the Inspection report to
the right one character.
Scrolls the report to show the
Header (focus required).
Scrolls the report to show the
Header (focus not required).
Scrolls the report to show the
last feature (focus required)
Scrolls the report to show the
last feature (focus not required)
Jump to a specific feature
number. |
NOTE: Windows sends all key presses to the
Window or Dialog that has "Focus", considered the current topmost active
window. For example, if you have Geomet and another program, such as
Excel active, the program that has "Focus" will receive all key presses.
If you press the <Home> key when the inspection report is not the
current "Focused" control, no response is seen.
To illustrate, open a long inspection report
and click you mouse in the graphic area. Press <Home> or <End> and the
inspection report does not move. Click your mouse in the report area and
repeat the key presses and the report will scroll according to your
commands.