Copy and Append

Up

Back

 
Delete:

(Un)Delete

Delete After

Permanently
 
Insert
Move
Jump To...
Navigation
Undo
Edit History
Feature Properties
Motion Edit
 
 
 

Site Map

 

helmel.com

Introduction

The Copy and Append command allows you to create one or more copies of a selected feature and append those to the inspection report.

Activating

The command to Copy and Append can be found on the sub-menu of a Highlighted feature, see figure 1. To Activate, highlight in the Geomet report the feature to create a copy from and right-click. Select from the sub-menu [Copy and Append 'x' number of Features].

figure 1, Single Feature Sub Menu figure 2, Multiple Feature Sub Menu figure 3, Requested count

NOTE: When selecting features for Copy and Append you may select a single feature, a range of features or random selections from your inspection report.

The right-click submenu must first pass through a validation process before it will appear. The first validation is that the Part Coordinate System (PCS) attached to the highlighted feature(s) must be the same as the current PCS and is a measured or constructed geometry.

Upon selecting the command, a dialog will appear that allows you to enter the number of new features to build. Upon accepting this dialog, new features will be created and appended to the inspection report. All motion, tolerance and custom settings will be retained in the newly created records.