Move Command

Up

Back

 
Delete:

(Un)Delete

Delete After

Permanently
 

Insert

Jump To...

Navigation

Undo

Edit History

Copy and Append

Feature Properties

Motion Edit

 
 
 

Site Map

 

helmel.com

Command Activation

Ctrl + i Modify→Move#
Keyboard Main Menu Toolbar

Introduction

The Move command allows the repositioning of a feature to another location within the inspection program. Assurances are provided to prevent moving to another PCS, or when the current probe is not the same as the feature's active probe.

figure 1, Enter Feature to move. figure 2, Enter new position

To move a feature, enter a Feature Number which specifies the feature to be moved, see figure 1. Press the <Ok> button and enter the location in the inspection report the feature will be moved to. Press <Ok> and Geomet will validate your request and perform the move.

When a the feature has been moved, Geomet updates all feature numbers and record links to ensure references to features remain intact.

TIP: Should you want to permanently delete a feature, such as feature number 15 of a 50 step inspection program. Start by moving the feature to the end of the inspection report. Once this has been accomplished, Press <Ctrl + u> which is the Undo command.


Edit History Tool, Undo, Insert, Delete, Delete All After, Navigation Keys, Delete Permanently