Introduction
Geomet supports several Coordinate Systems for use in your
inspection program. These include:
- MCS - Machine Coordinate System
- PCS - Part Coordinate System
- FCS - Fixture Coordinate System
- ICS - Interim Coordinate System
-
CCS - Clearance Coordinate Systems
To build and use a coordinate systems, several tools are
available. The lists below, Coordinate System Tools and
Coordinate System Commands are provided to explain in detail how
to build coordinate systems.
Coordinate System Tools
Geomet provide several commands to create, recall and transform coordinate systems. In
addition to the commands available, there are visual aids to assist and file utilities.
Please select from the command structure shown here to obtain additional information.
Coordinate System Commands:
Coordinate System Creation and Transformation:
Coordinate System Examples:
Geomet provides several examples to assist
you in learning about proper usage of the Coordinate System
commands. A listing of the available examples can be
found here.
|