Geomet home
Recalling Coordinate Systems
Search tool Information index
 
       
7.01.138 Geomet Junior, Junior+, 101, 101+, 301, 501 
      pre-version 7.01
  Command Activation
 
  Definition
  The CS Manager provides access to recall established Part Coordinate Systems, Fixture Coordinate Systems, activate the Machine Coordinate System, and if available establish a vector drive coordinate system for manual joystick controls on CMMs with DCC controls.
  Recalling a Part Coordinate System
 
Each time a completed PCS is established, it is given an ascending number starting with 1. If you are requesting a PCS recall, activate the Coordinate System Manager by pressing the key < ' > and ensure that the PCS button is pressed in the Select Type group.

Any existing PCS can then be made the current PCS by entering the desired PCS number. Optionally you can utilize the slider control next to the "Select Type" group to scroll through the available PCSs. If you were to enter a 0 for the desired PCS, you are in effect recalling the machine coordinate system. Press the Ok Button button to complete the recall function.
PCS Recall
  Recalling the Machine Coordinate System
 
Recalling the Machine Coordinate System can be accomplished by activating the Coordinate System Manager and ensure that the MCS button is pressed in the Select Type group.

Press the Ok Button button to complete the recall function.
MCS Recall