Tolerance State

Up

Back

 
Tolerance:

Format

 

GeoTol

Process Control

Flash Message

Report Control

 
 
 

Site Map

 

helmel.com

Command Activation

r Tolerances→Tolerance  
Keyboard Main Menu Toolbar

The Tolerance command toggles the state between On and Off. When On, each measured or constructed feature will display its corresponding Tolerance Application Dialog before attaching it to the inspection report. Upon accepting or escaping from the displayed tolerance dialog, Geomet will cycle to measure the next feature. When tolerance is set to Off, the measured or constructed feature will be appended to the inspection report and Geomet will cycle to measure the next feature.

When changing the tolerance state, a entry is made in the inspection report. The Undo command will remove the entry in the report and reverse the tolerance state.